I made this shirt to wear to Chicago TARDIS on Saturday, but then I scored an interview with Paul McGann and brought myself something nicer to wear (this TARDIS dress from Her Universe, to be specific). I still really like this shirt, though, so I thought I would share the DIY with you.
I began by cutting off the neck line, then cutting two inches off each side of the shirt. This allows for room to add in the lace without making the shirt too large and baggy.
|Cutting two inches off…
From there, it was pretty easy to just sew in a strip of black lace on both sides. Make sure to sew the strips in so that the seam of the t-shirt/lace line are on the inside of the shirt. It’s easy to mess this up. I didn’t do that this time, but I did do it for my Halloween DIY.
I laid each strip of lace down so that the edges of the lace lined up with the edges of both the front and back of the t-shirt. I cue enough lace so that there was an inch or so left at the bottom, but it was flush with where I wanted the top of the lace to end for the arm hole.
Once I had the side sewn in, I cut across the top of the t-shirt’s shoulder and inserted more lace there. I followed the same process of sewing in the top lace as I did sewing in the side lace. The picture above shows the process of sewing in the shoulder lace.
Remember that inch or so left at the bottom? I then folded it over and sewed a hem. I made sure to fold back the inner hems before I sewed the lower hem, to keep them in place.
Here’s the shirt hanging over the door. I pushed out the sides in the first picture so you can see where they are.
I wasn’t originally going to take a picture of the shirt on (it was a sweats day at my house), but then I threw it on over the tank top I was wearing under my sweatshirt. It doesn’t go, but you get an idea of what the shirt looks like on. Luckily, the flash was ridiculously bright which helped to hide the fact that it wasn’t a make-up day at my house, either. This shirt should be worn over a bandeau or a cami.